+86-21-62828320
- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
JW36-400
WORLD
400ton gantry type double crank metal parts stamping press, table size 2700x1100mm, press slide plate size 2400x1000mm, press side window size 1000x550mm, press stroke length 300mm, press stroke speeds 15-25 times per minute. Above press technical parameters are all customizable. Automatic accessories are easily mounted such as QDC, coil sheet uncoiling machine, roller feeder machine and transfer manipulators or transfer bars.
The H frame steel plate welded body is high rigidness after anealing treatment and sand blasting. Two pieces cross located crankshaft with two big transmission gears, opposite rotation to eliminate the lateral force.
World self-produced wet type clutch ensure lower noise and cleaner workpieces surfaces. It is easier for maintenance to change the hydraulic oil evey 6 months. All clutches are certified with dynamic balance test and temperature test.
The 400ton metal parts stamping press is standard equipped with:
-Panasonic or Omron PLC
-Siemens motor with customzied voltage (220V-600V)
-Showa brand hydraulic overload protection pump
-Taco or Ross or Toyooki brand dual safety solenoid valve for clutch
-Slide balance cylinder
-HMI in English version
-Grease automatic lubricant system
Options for this metal parts stamping press:
-Light barriers for safety
-Frequency motor drive
-QDC
-Tonnage monitor
-coil sheet automatic feeding machines
400ton gantry type double crank metal parts stamping press, table size 2700x1100mm, press slide plate size 2400x1000mm, press side window size 1000x550mm, press stroke length 300mm, press stroke speeds 15-25 times per minute. Above press technical parameters are all customizable. Automatic accessories are easily mounted such as QDC, coil sheet uncoiling machine, roller feeder machine and transfer manipulators or transfer bars.
The H frame steel plate welded body is high rigidness after anealing treatment and sand blasting. Two pieces cross located crankshaft with two big transmission gears, opposite rotation to eliminate the lateral force.
World self-produced wet type clutch ensure lower noise and cleaner workpieces surfaces. It is easier for maintenance to change the hydraulic oil evey 6 months. All clutches are certified with dynamic balance test and temperature test.
The 400ton metal parts stamping press is standard equipped with:
-Panasonic or Omron PLC
-Siemens motor with customzied voltage (220V-600V)
-Showa brand hydraulic overload protection pump
-Taco or Ross or Toyooki brand dual safety solenoid valve for clutch
-Slide balance cylinder
-HMI in English version
-Grease automatic lubricant system
Options for this metal parts stamping press:
-Light barriers for safety
-Frequency motor drive
-QDC
-Tonnage monitor
-coil sheet automatic feeding machines
