4LZ-4.0E Single Thresher Harvester
FEATURES & BENEFITS
AXIAL FLOW TYPE THRESHER
Axial flow type (I type) thresher is advanced technology for combine harvester.
The grain is feeding through the front impeller to the thresher. The moving
direction of grain with straw is a line along with the thresher. This design makes
better threshing performance with higher efficiency and better cleaning performance.
HIGH QUALIY BELT AND CHAIN TRANSMISSION SYSTEM
4LZ-4.0E harvester adopts high quality belts and chain for all the transmission
system. More reliable and longer working life.
SELF-PRODUCED GEARBOX WITH HST
The gearbox is produced by World with advanced technology and high quality
bearings and gears. Hydraulic HST is standard equipped for easy shift changing
and lower fuel consumption.
LONGER SPRING TYPE REEL TEETH
Longer spring teeth are better for laid rice harvesting.
Can pick up the crops when knife is 8cm distance to the ground.
360 DEGREE ROTARY GRAIN DISCHARGE PIPE
The 360 degree rotary grain discharge pipe is easy for discharge the grain
from the tank. This design makes less operators during the harvester is
harvesting. And higher efficiency till the grain tank is full and then the
harvester can drive to discharge the grain.
SPECIFICATIONS
Feeding Capacity (KG/s) | 4.0 | ||
Work Dimension L*W*H (mm) | 4900*2890*2700 | ||
Weight | (KGS) | 2900 | |
Cabin/Sun-roof | Sun-roof | ||
Engine Part | Model No. | Changchai 4L88 | |
Power/Speed (ps[Hp]/rpm) | 88/2700 | ||
Fuel | Light Diesel Oil | ||
Fuel Capacity (L) | 130 | ||
Fuel Consumption(kg/hm2) | 12～30 | ||
Start | Motor Starter | ||
Gear Box | ZKB65 made by WORLD Factory. | ||
HST | 40CC HST Imported from south Korea. | ||
Walking Part | Rubber Track | Length of Ground Contact (mm) | 1700 |
Center Distance (mm) | 1160 | ||
Size(mm) | 450*90*51 | ||
Average Contact Pressure (kpa[kgf]/cm2) | ≤20Kpa | ||
Min. Ground Clearance (mm) | 300 | ||
Gear Shifts | Variable Sun-transmission 3 Shifts | ||
Walk Speed (Km/Hour) | Low:0～1.85 Medium:0～6.5 High:0～9 | ||
Theoretical Work Speed (Km/Hour) | 0.9-6.5 | ||
Harvesting Unit | Grain Lifter | Divider | |
Working Width (mm) | 2200 | ||
Reel Bat | Dia. × Length (mm) | ∮900×2028 | |
Gearshift Method | Constant Speed | ||
Adjusting Means | Hydraulic | ||
Stubble Height[Lift] (mm) | 25cm or above | ||
Threshing &Harvesting Unit | Threshing Mode | Axial Flow Type, Bullet Rotor | |
Threshing Rotor | Type of Threshing | Beat Bar | |
Dia. ×Length (mm) | ∮620*2050 | ||
Rotating Speed(rpm) | 662/732 | ||
Fan | Diameter | ∮400 | |
Separating Type | Vibrating Sieves +Air Blow | ||
Area of Sieves (Lowe and Upper Sieves) (m2) | 1.645 | ||
Grain-unload Unit | Grain Tank Capacity (M3) | 1.4 | |
Grain Discharging Type | Vertical Discharging Pipe | ||
Alarm Units | Water Temperature, Battery, Oil, Grain Tank, Jam of 2# Auger | ||
Work Efficiency(hm2/h) | 0.4~0.7 | ||
Crops | Rice, Wheat | ||
Total Loss | Less than 2.5% | ||
Breakage | Less than 1.5% | ||
Impurity | Less than 1.5% | ||