5 Ton Wheel Loader with 3 Cbm Bucket

POWERFUL ENGINE SYSTEM

160 kw Cummins 6CTA8.3-C215 engine as standard. Shangchai SC11CB220 engine

and Weichai WD10G220 diesel engine are optional. All are 6 cylinders 4 strokes.

Big size water cooling system combined with high quality hydaulic oil radiator, ensures

better cooling performance even the wheel loader working in very hot area or sand area.

Double ail filter cores make air cleaner inside the engine.

---

STRONG TRANSMISSION SYSTEM

ZL50 planet type gearbox with hydraulic torque converter has 2 forward and 1

reverse speeds. Hydraulic power delivers smoother shift. The torque converter

is single stage, four elements with double turbines. The maximum permissible

temperature can be 120 degree. This transmission system provides strong power,

smooth operation and low cost for maintenance.

The axles are designed to handle extreme applications resulting in reliable

performance and extended life. The front axle is rigidly mounted to the frame in

order to withstand internal torque loads and still maintain support for the wheel

loader. The rear axle can oscillate to ±13 degrees helping to ensure all four wheels

stay on the ground providing stability even in the roughest terrain. The main reducer

uses spiral bevel gears with differential. The hub reducer uses planet gears. The air

over oil active brake is a dry type caliper brake with brake discs and brake pads which

is easy for maintenance and better for radiating.

---

SPACIOUS CABIN

The standard spacious cabin is equipped with shock absorbing seat, radio

and air conditioner. The optimized Seating System is 6-way adjustable to

accommodate operators of all sizes. The seat has a one piece high back that

supports the lumbar area of the back up through the shoulders. Both armrests

are large and can be adjusted up, down, fore, and aft to enhance comfort and

convenience. The steering column can be adjusted too. And the cabin is

mounted to the frame with hydraulic damper which decrease the noise and

vibration.

---

CENTRAL ARTICULATED STRONG FRAMES AND BEST HYDRAULICS

The front frame is connected with the rear frame by pins and bearings.

The space is big which is easy for maintenance. The high precision of

hole boring makes it easy to connect the articulations. High quality

temperature treatment ensures the hardness of the pins. In this way,

the loader can be operated smoothly with lower fuel cost.

World wheel loaders adapt best quality hydraulic pumps, valves, cylinders,

joints, seals and hoses. Advances hydraulic system design offers smoother

operation, lower oil temperature and better hydraulic pressure assignment.

Each loader is tested strictly to check the oil leak, oil temperature, operation

and power before shipment.