JS36 Two Points Eccentric Gear Press

Inquire

FEATURES & BENEFITS

CLOSE TYPE H FRAME BODY

The steel welded structure is heat treatment and ball blasting to release

the welding stress. The press body can be disassembled to four parts:

crown, bolster, slide and columns which are fixed by tie rod bolts and nuts.

It is better to produce press according to customers' special specifications

cause of this structure design. Seller will send engineer to buyer's factory

for installation service. Foundation drawings will be sent to buyer before

shipment.

All the body parts are machined by PAMA machine center. Just need to fix the

part on the machine table and all the surfaces will be finished machining in one time.

High accuracy lengthened slide guides are fixed on the columns. The guides can be fine

adjust by bolts to get better parallelism and squareness.

ECCENTRIC GEAR TRANSMISSION

Two big eccentric gears with link rods and guide pillars. Eccentric gear transmission

system gives the press bigger stroke length than crank type press. Guide pillars and

bushes ensure higher precession. All the gears are strenghtened and grinding, lower

noise and longer service life.

Power from the motor to the clutch. The two eccentric gears are connected with the clutch

drive gear with a middle gear. Thress stages transmission make it more stable.

SEPARATE DRY TYPE CLUTCH AND BRAKE

Self-produced dry type clutch and brake, adpots high quality clutch blocks.

The clutch is under dynamic balance testing.

Clutch working: dual-safety valve opens and the high pressure air goes inside

the cylinder, moves the brake block away and press the cluch block to work.

Then flywheel shaft will rotate with the flywheel.

Brake working: dual-safety valve closes and the high pressure air goes out.

The brake blocks will press on the brake body under the pressure of the

springs. Thus the brake works and stops the flywheel.

OPTIONAL AIR CUSHION AND MOVABLE TABLE

Full air type cushion is optional. Stroke adjustable and lock

function are available too.

Movable table is optional, front move, left to right move and

T type move are available.

Full air type cushion has the same capacity of pressing and ejection.

Independ air tank for cushion ensures the variation of air pressure

no less than 10%.

SPECIFICATIONS

Parameter		Unit	JS36- 250	JS36- 300	JS36- 400
Nominal Capacity		KN	2500	3000	4000
Nominal pressure stroke		mm	13	13	13
Slide Stroke		mm	400	400	400
Strokes Per Minute		spm	16	16	16
Max Die Set Height		mm	650	720	770
Die Height Adjustment		mm	315	400	400
Bolster Size	L×R	mm	2600	2800	2800
	F×B	mm	1300	1600	1600
Slide Bottom Size	L×R	mm	2600	2800	2800
	F×B	mm	1300	1600	1600
Side Knockout Rod	Structure		rigidity	rigidity	rigidity
	Knockout pressure	KN	100	150	150
Cushion	Clamping pressure	KN	510	600	600
	Withdraw pressure	KN	510	600	600
	Quantity	PC	1	1	1
	Stroke	mm	200	200	200
Overall Dimensions	Height	mm	6960	7000	7000
	L×R	mm	4760	5100	5100
	F×B	mm	4200	4000	4000
Motor Power		KW	37	37	45
Weight		T	75	90	104
Parameter		Unit	JS36- 500	JS36- 630	JS36- 800
Nominal Capacity		KN	5000	6300	8000
Nominal pressure stroke		mm	13	13	13
Slide Stroke		mm	400	500	500
Strokes Per Minute		spm	16	14	10
Max Die Set Height		mm	650	1100	990
Die Height Adjustment		mm	400	500	400
Bolster Size	L×R	mm	2800	3500	3640
	F×B	mm	1600	1800	1800
Slide Bottom Size	L×R	mm	2800	3500	3640
	F×B	mm	1600	1800	1800
Side Knockout Rod	Structure		rigidity	rigidity	rigidity
	Knockout pressure	KN	150	150	150
Cushion	Clamping pressure	KN	600	1000	1000
	Withdraw pressure	KN	600	1000	1000
	Quantity	PC	1	1	1
	Stroke	mm	200	250	250
Overall Dimensions	Height	mm	7400	8000	8500
	L×R	mm	5100	6200	6800
	F×B	mm	4000	4370	4600
Motor Power		KW	75	90	110
Weight		T	142	180	210
Parameter		Unit	JS36-1000	JS36-1250	JS36-1600
Nominal Capacity		KN	10000	12500	16000
Nominal pressure stroke		mm	13	13	13
Slide Stroke		mm	500	600	500
Strokes Per Minute		spm	10	12	10
Max Die Set Height		mm	1000	1300	950
Die Height Adjustment		mm	400	500	400
Bolster Size	L×R	mm	4000	4000	5000
	F×B	mm	2000	2000	2000
Slide Bottom Size	L×R	mm	4000	4000	5000
	F×B	mm	2000	2000	2000
Side Knockout Rod	Structure		rigidity	rigidity	air
	Knockout pressure	KN	150	150	100
Cushion	Clamping pressure	KN	1200	1500	1500
	Withdraw pressure	KN	1200	1500	1500
	Quantity	PC	1	1	1
	Stroke	mm	250	250	250
Overall Dimensions	Height	mm	9000	9900	10000
	L×R	mm	7500	8500	8500
	F×B	mm	5300	5600	5600
Motor Power		KW	110	132	132
Weight		T	255	320	480

JS36 Two Points Eccentric Gear Press

FEATURES & BENEFITS

SPECIFICATIONS

Related Products