25 Tonne C Frame Single Crank Punching Machine with Pneumatic Clutch
Product Description
25 tonne C frame single crank punching machine with pneumatic clutch, is widely used for sheet metal parts punching and stamping. The small size press machine can work as inches, single stroke and continuous strokes. The press can stop at any points once press the emergency button on control panel for more safety of operators. CE certificated suitable for European and American markets.
Standard Configurations:
-Wet type cpmbined pneumatic clutch and brake
-PLC control
-Hydraulic overload protection system
-Automatic central grease lubrication system
-Working light
-HMI with touch sreen
-Two-hand buttons
-Foot pedal
-Anti-vibration pads
-Cam controller
-Slide and die weight balance cylinders
Specifications
| ITEM | CODE | UNIT | JH21-25 | |
| Nominal Capacity | Pe | KN | 250 | |
| Slide Stroke Length | S | mm | 80 | |
| Slide Strokes | Fixed | spm | 100 | |
| Variable(optional) | spm | 60-120 | ||
| Max. Die Shut Height | H2 | mm | 250 | |
| Die Shut Height Adjustment | t | mm | 50 | |
| Throat Depth | C1 | mm | 210 | |
| Distance Between Uprights | d1 | mm | 450 | |
| Slide Bottom Size | FB | b | mm | 250 |
| LR | a | mm | 360 | |
| Shank Hole Size | Diameter | d | mm | 40 |
| Depth | I | mm | 65 | |
| Table Size | FB | D | mm | 400 |
| LR | C | mm | 720 | |
| Thickness | H3 | mm | 80 | |
| Table Hole Diameter | ¢ | mm | 150 | |
| Overall Dimensions | FB | A | mm | 1500 |
| LR | B | mm | 945 | |
| Height | H | mm | 2120 | |
| Motor Power | KW | 3 | ||
| Weight(approximate) | kg | 2450 | ||