info@worldshm.com

+86-21-62828320

  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search
banner
banner1
banner3

PRODUCT CENTER

JH21 C frame single crank power press (punch press, press machine, punch, stamping press, mechanical powewr press), capacity from 25 ton to 400 ton. Welded steel body, heat treatment, shot blasting, better rigidness, accuracy and stability. PLC control, wet type combined pneumatic clutch and brake, hydraulic overload protected, auto lubricated. The press can work with NC feeder for automatic production.
H frame double crank power press (punch press, press machine, punch machine, punch, stamping press, mechanical press), capacity from 110ton to 500ton, welded steel body, PLC control, wet clutch, hydraulic overload protected, auto lubricated, touch screen control. Bigger table better for big sheet stamping and progressive die stamping process. The press can work with NC feeder and transfer system for automatic press line.
JW31 straight side single crank press is applicable to light, thin material, for single, and progressive die application in blanking, piercing, bending, forming, interlink with ROT line or transfer unit. High rigidity frame, applications suitable for various kinds of stamping works. The press capacity is from 160ton to 630ton. Slide guide 8 faces for higher precision.
JH25 C frame double crank power press (press machine, punch press, punch machine, punch, mechanical power press, stamping press), capacity from 110ton to 315ton, PLC control, wet clutch, hydraulic overload protected, both mechanical and electric cam control, auto lubricated. Bigger table better for big sheet stamping or progressive die stamping process. Light curtain, inverter, air cushion are optional.
JS36 Two Points Eccentric Gear Press, capacity ranges from 250 ton to 2000 ton. The press adopts eccentric gear transmission system with longer stroke length and more power energy, most suitable for car body parts stamping. The press can be disassembled as crown, slide, columns and bolster which are fixed with tie rods and nuts. Big table and customized table size, shut height, stroke length are widely conform to progressive die stamping and big sheet parts stamping process.
JS31 straight side eccentric press is applicable to light, thin material, for single, and progressive die application in blanking, piercing, bending, forming, interlink with ROT line or transfer unit. High rigidity frame, applications suitable for various kinds of stamping works. The press specifications can be customized and it is suitable for hot forging and auto parts production.
QC11Y hydraulic guillotine machine is a type of sheet metal cutting machine, which is suitable for sheet plate cutting process. Siemens motor, Sunny pump, Rexroth valve and Estun E21s NC system are all standard equipped. Strong steel welded structure, high quality hydraulic cylinders and best blades ensure the high performance of this hydraulic shearing machine.
WC67Y hydraulic press brake is a type of sheet metal bending machine, which is suitable for sheet metal plate bending process. The press brake capacity ranges from 40 ton to 400 ton and the table length from 2 meters to 6 meters. The press brake is standard equipped with Siemens motor, Sunny pump, Rexroth valve, Estun E21 NC system and standard punch and die. Customized punch and die are optional. Delem DA41 CNC system with servo motor is available too.
3 in 1 Decoiler Straightener NC Feeder, is an automatic feeding system for press stamping including an uncoiler and a combined straightener and NC feeder. The compact structure needs smaller space for location. Straightener feeder is run by servo motor. PLC control with touch screen type interface. Feeding length and feeding speed can be set through the screen. Hydraulic expansion, motorized feeding height adjustment, and a hydraulic coil loading car is optional.
4LZ-4.0E axial flow type combine harvester adopts the I type thresher, higher efficiency and better cleaning performance. Changchai brand 88hp diesel engine, self-produced gearbox with HST, rubber track 450x90x51, 360 degree rotary grain discharge pipe, 1.4m3 big grain tank, 2200mm cutting width and 4kg/s feeding capacity. This track type harvester is suitable for paddy rice harvesting, wheat harvesting, soybean harvesting, rape and cumin harvesting. It can harvest corn too if equip with an extra corn harvesting accessory.
45hp small tractor, four wheel drive, standard equips with Chinese brand diesel engine and self-produced gearbox and axles. Single clutch, mechanical brake, hydraulic steering, 3 points link hitch, PTO speeds 540/760 rpm. Front ballast, rear ballast, and sun-roof are optional.
WD1104, 110HP tractor, four wheel drive, Yuchai engine, 4 cylinders 4 strokes, 16+8 gearbox with creeper, tires size 13.6-24/16.9-34 flat thread type, dual action clutch, bilateral pressure, hydraulic steering, PTO speed 760/850, two pairs of output valves, with canopy. Close type cabin with air conditioner is optional. Implements as disc plough, hydraulic harrow, maize planter, potato planter, trailer and grass cutter are all available.
5 ton Wheel Loader with 3 cbm bucket and 5000 kg rated load, 220hp diesel engine, planet type gearbox with hydraulic converter, air conditioned cabin, tyre size 23.5-25, 16500 kg operation weight. Accessories as pallet fork, coal bucket, rock bucket, wood log grapple and grass grapple are optional.
21 ton excavator is most suitable for road construction, building construction and evenly for mining construction. This excavator is standard equipped with 113kw ISUZU engine, Kawasaki hydraulic pump, air conditioned cabin and 600mm steel track. Accessories as hydraulic quick change coupler, hydraulic breaker, grapple and hydraulic shear are all optional. Smooth operation and high efficiency make the excavator more competitive.
Ride-on lawn mower is suitable for commercial grass cutting. Powered by original B&S engine, stepless hydrostatic speed control, with E-blade clutch system. Head lights can be automatically switch on/off depends on the working condition. Unique design of chassis creates smooth air flow, with skilled cutting system, ensures excellent performance and high productivity. Battery status, fuel level, grass catcher alarm and working hours are all displayed on the console screen.

WHAT WE DO


  We produce construction machines as wheel loaders and hydraulic excavators.
  We produce agriculture machines as combine harvesters and tractors.
  We produce metal forming machines as power press machines, shearing machines and bending machines.
  We produce garden tools as lawn mowers, tillers and scarifiers.
  We are Group Company.
  We are TOP500 private company in China


 

CORPORATE CULTURE

Loyal to the company
Sincere to the clients
Frank to the colleagues
Work steadfastly
Act honestly




 

ENTERPRISE VISION

Achieve higher customer satisfaction
Provide better products and solutions to customers
Professionality and responsibility
To be a reputable company
Build to last





 

ENTERPRISE DEVELOPMENT

To be one of the biggest press manufacturer in the world
To be one of the biggest agriculture machines manufacturer in the world
To be a first level construction machines supplier in China
To be a most professional lawnmowers supplier in the world
 

 

LATEST NEWS

Address

432 Huaihai Road, Shanghai, 200052, China

Mobile Phone

13817590728/13817120700

  • Product Name
  • Product Keyword
  • Product Model
  • Product Summary
  • Product Description
  • Multi Field Search

PRODUCTS

QUICK LINK

CONTACT US

Address: 432 Huaihai Road, Shanghai, 200052, China

Phone:   +86- 13817590728 / 13817120700

Telephone: +86-21-62828320 / 62828873
Email:   info@worldshm.com

 

Copyright © SHANGHAI YINGXIN WORLD MACHINERY CO., LTD. All rights reserved.  Website Registeration Number: 沪ICP备09030720号-2
 Sitemap